OMS LINEA PATAVIUM S.T.01/3X ED.0 REV.8 09/2017
63
CONNECTIONS
First, make sure that the flow of air and water from the water and pneumatic mains is regular. O.M.S. declines
any and all responsibility for faults or damage originating from non-compliance with the warning below:
Water supply:
Water with medium/low salt content (fit a water softening device if necessary), to be connected to
the 6x8 diameter tube (see paragraph 2 TECHNICAL SPECIFICATIONS for admitted pressure).
Pneumatic supply:
Compressed air, preferably dehumidified and oil-suspension free, to be connected to the 4x6
diameter tube (see paragraph 2 TECHNICAL SPECIFICATIONS for admitted pressure).
We recommend making a temporary direct connection between the water delivery pipe and the drain pipe,
and letting the water circulate for a few seconds before installing the equipment. This enables elimination of
any impurities from the tubes.
WARNING
P
ay attention to the position of the water pipe so that it does not come into contact with the
armchair engine (if present)
Note:
Refer to the wiring and installation diagrams provided for all electrical connections.
