![background image](http://html.mh-extra.com/html/omron/zx2-series/zx2-series_user-manual_1633407020.webp)
Part Names and Functions
20
ZX2 User’s Manual
INTRODUCTION
MAIN
APPLICATIONS
& SETTING
METHODS
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
DETAILED
SETTINGS
FLOW OF
OPERATION
CONTENTS
PREPARATION
FOR
MEASUREMENT
BASIC
SETUP
TROUBLE-
SHOOTING
Height
Double
Sheet
Detection
Positioning
Eccentricity
and Surface
Deflection
Steps
and
Warpage
Thickness
Digital Displays
The information displayed on the main and sub-displays depends on the currently
selected mode. The default mode is the RUN mode.
When the power is turned ON, the type of Amplifier Unit (ZX2-LDA) will be displayed on
the main display. The software version and then the channel No. will be displayed on the
sub-display.
These details are displayed for approx. four seconds, and then data for the RUN mode
will be displayed.
(For details on setting transition charts, see page 130.)
Alphabet Display Format
The alphabet appears on the main and sub-displays as shown in the following table.
Mode
Main display
(upper section, red)
Sub-display
(lower section, orange)
RUN
The measured value (the value
after the measurement conditions
have been reflected) is displayed.
For example, when the hold
function is set, the held value will
be displayed.
Default measured values are as
follows:
By pressing the
button, the HIGH
threshold, LOW threshold, analog output
value, resolution (max. value of measured
value during one second - min. value), current
value (value before execution of zero reset,
hold, scaling and 2-sensor operation), and
BANK are displayed in this order.
MENU
The function names are
displayed in order by pressing
the
buttons.
The setting for the function displayed on the
main display is displayed.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Measuring range
NEAR side
FAR side
- indication
+ indication
0
Measuring center distance