ZG2 Short Manual
2) Mount the sensor head:
The ZG2 can measure up to 8 tasks at the same time. The settings for these 8 tasks is
stored in 1 bank. Up to 32 banks can be stored in the ZG2-WDC. The bank can
be changed in run mode via digital input terminal, RS232 or USB.
Move the sensor head
until the profile can be
seen on the LCD screen
in „RUN“ mode.
The red cross and the
mm-value on the screen
represent the actual
result of task 1:
The average height of
the whole profile.
Example: Width measurement of a
bar of a workpiece:
LD ON
ZERO
TRIG
T1
T2
T3
T4
LV:
1-320
WIDTH2
B1T1
3.000mm
T
u
to
ri
a
l