![background image](http://html1.mh-extra.com/html/omron/zg2-series/zg2-series_short-manual_743551007.webp)
Setting Tutorial
1) Initialization:
To operate the menu you can either use the cursor keys and the set key
or the number keys.
1) Move first the menu switch to „EXP“ and then the mode switch to „FUN“.
2) Press key „4“ to select the System menu.
3) Press key „2“ to select „INIT“.
4) Confirm „YES“ with key „1“. Wait until the init process is finished.
5) Set the mode switch back to „RUN“.
6) Confirm saving the settings with the key „1“.
After initialization the laser power mode is set to „Multi Mode“ (s. page xx) and
the measurement item for task 1 to „Height1“. On the LCD screen you can see
the profile in real time. The red cross and the value in the bottom line shows the
result of task 1. Pushing the orange „Menu“ key toggles the lcd screen
first to the measurement result screen and then to the cycle time display/
resp. the screen saver.
ZG2 Short Manual
MENU
/VIEW
ESC
ADJ
FUN
RUN
STD EXP
SET
1
2
3
4
LD ON
ZERO
TRIG
T1
T2
T3
T4
LV:
1-320
HEIGHT1
B1T1
3.000mm
1) Set to EXP
2) Set to FUN
Corsor keys
Number keys
1 - 4
Menu switch
Mode switch
T
u
to
ri
a
l