ZG2 Short Manual
LD ON
ZERO
TRIG
T1
T2
T3
T4
MEAS/WIDTH1
2 CUSTOM
3 SCALE
1 ITEM
4 AUTO
P1
P2
Now all important settings are made und you can check the result in the RUN
mode: Move the mode switch to the „RUN“ position and confirm the settings with
key 1 for „YES“.
In RUN mode the sensor measures the width of the bar and shows the result in
the bottom line of the screen. The result is shown in red color if the result is above
the high threshold or below the low threshold. In this case also the corresponding
task LED is off. If the result is between the high and low threshold values it is
displayed in green color and the task LED is lit.
After pressing the orange „MENU/VIEW“ button the sensor displays a summary
of the results of 4 tasks at the same time.
LD ON
ZERO
TRIG
T1
T2
T3
T4
LV:
1 - 320
WIDTH1
B01T1
12.000mm
T
u
to
ri
a
l
Current screen:
Bank 01
Task 1
current measurement
item
Measurement
value
LED for digital output
of task 1
