36
S
E
CT
ION 3
L
inea
r Sens
or Cont
ro
ller Co
nnec
tions
Setup Manual
SECTION 3
Connecting External Devices
Linear Sensor Controller Connections
Crimp Terminals and Cables
The terminal blocks use M3 terminal screws.
Use appropriate crimp terminals for M3 screws as shown below. Tighten the terminal screws
securely using a torque between 0.5 and 0.6 N
⋅
m.
Terminal Names
Reinstall the terminal block protection covers so that the terminal blocks are covered after wiring.
Recommended Model
Manufacturer
Model
Recommended
wire size
Forked
J.S.T. Mfg Co., Ltd.
V1.25-N3A
1.31 to 1.65 mm
2
Round
J.S.T. Mfg Co., Ltd.
V1.25-MS3
6.2mm max.
6.2mm max.
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
4 to 20mA -5 to 5V
0
Analog output terminal for current output in the range 4 to 20 mA.
Analog output terminal for voltage output in the range -5 to 5 V.
Analog output ground connected to input devices.