22
SE
CTION 2
Mou
n
ting
the
Controll
er
Setup Manual
SECTION 2
Installation
Mounting the Controller
There are two ways to mount the controller: DIN track mounting or surface-mounting.
DIN Track Mounting
The controller can easily be mounted on or removed from a 35-mm width DIN track.
Mounting the Controller
Hook the controller into the DIN track as shown in the diagram and then press in at the bottom
until the controller locks into place.
Removing the Controller
Use a flat-bladed screwdriver to pull the hook down and then pull out the controller from the
bottom.
PFP-M
End Plate (OMRON)
DIN Track
The following DIN Tracks are
available from OMRON.
䇭
PFP-100N (1m)
䇭
PFP-50N (50cm)
䇭
PFP-100N2 (1m)
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍