11
Setup Manual
INT
R
ODUCTI
O
N
Pr
ec
autio
n
s in
us
ing the
Pr
o
duct
INTRODUCTION
Environment
The sensor cannot detect the following types of objects accurately: Materials with extremely
small reflectances, objects with small curvatures, or objects tilted to a large degree
Component Installation and Handling
Dedicated Components
Make sure to use the dedicated components for the sensor and console connected to this
controller.
•
Sensor: Z550-SW70
•
Console: Z300-KP
Connecting/Disconnecting Cables
Always turn the power supply off before connecting or disconnecting any cables.
Touching Signal Lines in Connectors or Terminals
To prevent damage from static electricity, use a wrist strap or another device for preventing
electrostatic discharges when touching terminals or signal lines in connectors.
Wiring
When using a transformer for the Controller's driving power supply, use an isolation transformer
in the way shown below.
Do not use an auto-transformer. Doing so may result in equipment failure.
䋫
䋭
Commercial
power supply
Isolation transformer
䋫
䋭
Z5FP-MC10
Z5FP-MC10
Auto-transformer
Commercial
power supply
0intro.fm Page 11 Monday, April 19, 2004 3:17 PM