WX2B
WX2B
3
Application Examples
J
REDUCE WIRING TO EXTERNAL SENSORS, SWITCHES AND POWER SUPPLY
Conventional Method Requires Major Wiring Effort.
Position Control Module
Connector on the
Position Control
Module side
The connectors are soldered.
Power
supply
Switch/Sensor
Servo Driver
Connector on the
Servo Driver side
Position Control Terminal Block
All wires are connected to the Position Control Terminal Block with ease.
Position Control Module
Servo Driver
Servo Control Screw
Terminal Block
Switch/Sensor
•
Relays control signals between the Servo Driver and the Position Control
Module with minimal wiring effort.
•
Connectors are wired with a single screwdriver and no soldering is required.
•
Dedicated Cable connects Units.
Power
supply