35
Labeling
Section 3-13
Setting item
Set value [Factory default]
Description
Filling up holes
• Checked
• [Unchecked]
Select the process method for
the part encircled by the desig-
nated color circle.
When checked, the hole is pro-
cessed as having the specified
color.
Outside trimming
• Checked
• [Unchecked]
This option can be used only
when there is a section of the
designated color in the mea-
surement region that does not
need to be measured.
When „Checked“ is set, the
whole area outside of the mea-
surement region is extracted as
having the specified color.
Object area range
0 to 999999999
Specify the range of the area to
be judged as a label.
Sort condition
• Area ascending
• [Area descending]
• X ascending
• X descending
• Y ascending
• Y descending
Specify the conditions by which
label number is re-assigned.
When sorting referencing the X
and Y coordinates, the upper
left is the origin.
Label No.
[0] to 2499
Input the label number for the
data to be output.
Summary of Contents for Xpectia-FZ3 Series
