23
Sensitive Search
Section 3-3
3-3
Sensitive Search
The registered models are automatically finely divided and matched in
detail.Of the divided models, the one with the lowest correlation is output.
Sensitive search is suitable when the difference between the model image
and measurement image is small and regular searches do not produce differ-
ences in correlation.
• When identifying the shape of the divided area
Setting item
Set value [factory default]
Description
Sub-model number X 0 to 10 [4]
This sets the number of divi-
sions of the registered model in
the X direction.
Sub-model number Y 0 to 10 [4]
This sets the number of divi-
sions of the registered model in
the Y direction.
Stab.
1 to 15 [The default value
depend on the connected
camera.12 or 15]
Specify which is to have priority,
measurement stability or speed.
If lowering stability does not
speed up processing, it is likely
that many candidates have
been detected.In this case,
specify a larger value for
„Candidate LV“ or „Stab.“
Prec.
1 to 3 [2]
Specify which is to have priority,
measurement positional preci-
sion or speed.
Plain inspection
• Checked
• [Unchecked]
Specify whether or not to
inspect the plain region.
Summary of Contents for Xpectia-FZ3 Series
