background image

4

* Items indicated with an asterisk are dedicated items, and cannot be substituted.

Peripheral Device

Input Device

Camera

LCD monitor

Power Supply

FZ-M08 (8.4-inch)

FZ-VM (2 m, 5 m)

Camera cable
FZ-VS (2 m, 5 m, 10 m)

Standalone camera FZ-SC/FZ-S

FZ-SC2M/FZ-S2M

*FZ-SC2M/FZ-S2M camera can be connected only with FZ2-50_ and  FZ2-55_ controller.

USB memory
FZ-MEM256

Mouse, track ball
(Commercially available USB devices)

Box type FZ2-350/FZ2-355

FZ2-550/FZ2-555

LCD integrated type FZ2-300/FZ2-305

FZ2-500/FZ2-505

Front view

Touch pen (standard accessory)

Right-side view

Controller

*

Controller

Monitor cable

*

*

Camera cable

*

*

*

*

Elastic camera cable
FZ-VSB (2 m, 5 m, 10 m)

Right angle camera cable
FZ-VSL (2 m, 5 m, 10 m)

Recommended Model
   By OMRON Corporation
   S8VS-12024

Use the monitor to check images and display the condition-setting 
menus. The Controller performs the image processing specified by 
the user settings and outputs the measurement results.

The Controlle r perform s the image 
processing specified by the user settings 
and outputs the measurement results.

Use the monitor to check images 
and display the condition-settin g 
menus.

Detects workpieces as images.

Basic Configuration

Intelligent camera

FZ-SLC15/FZ-SLC100

Automatic focus camera

㪝㪱㪄㪪㪱㪚㪈㪌㪆㪝㪱㪄㪪㪱㪚㪈㪇㪇

Summary of Contents for Xpectia FZ2-30














Reviews: