![background image](http://html1.mh-extra.com/html/omron/wlm/wlm_datasheet_1633528010.webp)
F-108
Long-life Two-circuit Limit Switch
WLM
@
Wiring
Use 1.25-mm lead wires and M4-insulation covered crimp terminals
for wiring.
Crimp Terminal External Dimensions
Wiring Method
Switch Box Section
Note:
Ground terminals are not installed on the standard models.
Operation Set Position
There is a set position marker slit on the rubber cap of the head.
After operation, set the slit on the rubber cap so that the fluorescent
color on the shaft section can be seen.
Terminal Plate
By using a short circuit plate, as shown in the following diagram, the
Switch can be fabricated into a single-polarity double-break model.
When ordering specify WL Terminal-Plate (IWPA01).
.
D dia.
dz dia.
dz dia. 4.3
D dia.
4.5
B:
8.5
L: 21.0
F: 7.8
l
: 9.0
(mm)
Ground terminal
NO terminal
NC terminal
16
±
0.15
9+
0.2
2.1R
2R
3R
t = 0.6 Copper plate
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. C112-E1-02