background image

F-86

Two-circuit Limit Switch 

WL

Lamp-equipped Models

Roller Lever

WLCA2-LE/LD
WL01CA2-LE/LD

Note:

Unless otherwise indicated, a tolerance of 

±

0.4 mm 

applies to all dimensions.

Sensor I/O Connector Models

Roller Lever Models

Standard Model (WLCA2), High-precision Model (WLGCA2), Overtravel Model (WLH2), and Overtravel High-sensitivity 
Model (WLG2)

Note: 1.

For the WLG2 model, only the dimensions for the set position marker plate change.

2.

Unless otherwise indicated, a tolerance of 

±

0.4 mm applies to all dimensions.

3.

The above diagram is for a lamp-equipped model.

Four, M3.5

60 max.

42 max.

Note: 

Stainless steel roller

17.5 dia. (length: 7) 
Stainless steel roller

M5 (length: 12) 
Allen-head bolt

0

Four,  
5.2

+0.2

 dia. holes

JIS B0202 G1/2 
Effective thread: 
4 threads min.

Four, M6 
Depth: 15 min

38R

Three, M4 
(length: 13) 

OF max.

13.34 N

RF min.

2.23 N

PT

15

±

5

°

OT min.

30

°

MD max.

12

°

Direct-wired Connector Models

Note: 

Stainless sintered roller

Pre-wired Connector Models

Four,, M3.5

42 max.

60 max.

60 max.

Four, M3.5

SC-1M

XS2H-D421

42 max.

17.5 dia. 
(length: 7) 
(see note)

M5 (length: 12) 
Allen-head bolt

0

Four,  
5.2

+0.2

 dia. holes

JIS B0202 G1/2 
Effective thread: 
4 threads min.

Four, M6 
Depth: 15 min.

17.5 dia. 
(length: 7) 
(see note)

M5 (length: 
12) Allen-
head bolt

0

Four,  
5.2

+0.2

 dia. holes

Four, M6 
Depth: 15 min.

38R

Three, M4 
(length: 13)

38R

Three, M4 
(length: 13)

6 dia.

Note: 

Stainless sintered alloy roller

Summary of Contents for WL -











































Reviews: