manualshive.com logo in svg

Omron WL -, Datasheet

Share
Download
Omron WL - Datasheet Download Page 7

Two-circuit Limit Switch

 

WL

F-63

Lim

it 

Switch

es

Adjustable Roller Levers and Adjustable Rod Levers

Note: 1.

For the approved standards file numbers, refer to page 69.

2.

For external dimensions and other information, refer to pages 77 to 94.

3.

One-side operation means that three operational directions can be selected electrically, according to the change in direction of the oper-
ating plunger. The operating plunger is set for operation on both sides before delivery. Those models for which one-side operation is im-
possible can only operate on both sides. For details, see page 94. The operational plunger is factory-set to both sides.

Rod Spring Levers and Fork Lever Locks

Note: 1.

For the approved standard file numbers, refer to page 69.

2.

For external dimensions and other information, refer to pages 77 to 94.

3.

One-side operation means that three operational directions can be selected electrically, according to the change in direction of the oper-
ating plunger. The operating plunger is set for operation on both sides before delivery. Those models for which one-side operation is im-
possible can only operate on both sides. For details, see page 94. The operational plunger is factory-set to both sides.

4.

The fork lever lock is configured so that the dog pushes the lever to reverse the output and this reversed state is maintained even after
the dog continues on. If the dog then pushes the lever from the opposite direction, the lever will return to its original position.

Type

Total Travel (TT)

Features

Actuator (See note 2.)

Standard

One-side operation possible. (See note 3.)
Head can be mounted in any of the four directions.

WLCA12

---

---

WLCL (WL-4A100)

Overtrav-
el

General

One-side operation possible. (See note 3.)
Head can be mounted in any of the four directions.

WLH12

WLHL (WL-4A100)

WLHAL4 (WL-3A100)

High-sensi-
tivity

One-side operation possible. (See note 3.)
Head can be mounted in any of the four directions.

WLG12

WLGL (WL-4A100)

Side-instal-
lation

One-side operation is possible. (See note 3.)
Head can be mounted in any of the two directions. 
(When the Head can be mounted horizontally, the 
Head can be mounted in any of the four directions.)

WLCA12-2N

WLCL-2N (WL-4A100)

WL-2A100 

Adjustable 

Roller Lever

WL-4A100 

Adjustable Rod 

Lever (Adjustable 

length: 25 to  

140 mm)  

WL-3A100 

(Adjustable length: 

350 to 380 mm)

p

Type

Total travel (TT)

Features

Actuator (See note 2.)

Protective

Head can be mounted in any of the four directions.

---

WLCA32-41 
(WL-5A100)

WLCA32-42 
(WL-5A102)

WLCA32-43 
(WL-5A104)

Overtrav-
el

General

One-side operation is possible. (See note 3.)
Head can be mounted in any of the four directions.

WLHAL5

---

WL-3A200 Rod 

Spring Lever

Fork Lever Locks: 

WL-5A100,  
WL-5A102,  

WL-5A104

Summary of Contents for WL -











































Reviews:

No comments

Brands by name

Popular brands

Load more brands