9-8
Chemicals which affect a tag are shown below.
ABS resin and epoxy resin are used as case material and filling material, respectively. Referring to the list below, use suitable chemi-
cals. Do not use any chemicals which affect the ABS resin and epoxy resin.
Any chemicals cannot be used for explosion-proof application.
•
Chemicals which cause deformation, crack, etc.
•
Chemicals which may cause discoloration, swelling, etc.
•
Chemicals which do not affect ABS resin nor epoxy resin.
Note: The test above is the result at a room temperature (23
°
C). Even if the chemicals do not affect the ABS resin or epoxy resin at the
room temperature (23
°
C), such chemicals may affect the resin at a high temperature or low temperature. Check the chemicals
fully in advance.
ABS Resin
Epoxy Resin
Trichlene, acetone, xylene, toluene, gasoline, creosol,
methylene chloride, phenol, miclohexanone, aqua regia,
chromic acid, sulfur (90% RT), methyl ethyl ketone,
aniline, nitrobenzene, monochlorobenzene, pyridine, nitric
acid (60% RT), and formic acid (80% RT).
Aqua regia, chromic acid, sulfuric acid (90% RT), nitric
acid (60% RT), liquid ammonia, acetone, methylene chlo-
ride, phenol, and trichlene.
ABS Resin
Epoxy Resin
Hydrochloric acid, alcohol, freon, sodium hydroxide,
hydrogen peroxide, benzine, sulfuric acid (10% RT), nitric
acid (10% RT), phosphoric acid (85% RT), and liquid
ammonia.
Sulfuric acid (10% RT), nitric acid (10% RT), hydrochloric
acid (30% RT), acetic acid (50% RT), nitric acid, calcium
hydroxide, benzene, creosol, alcohol, miclohexanone, tol-
uene, xylene, benzine, and grease.
ABS Resin
Epoxy Resin
Ammonia, kerosene, mineral oil, developer, YUSHIRO-
KEN S50, CHEMICOOL Z, VELOCITY NO. 3, YUSHIRO-
KEN EEE-30Y, petroleum, grease, acetic acid, nitric acid,
calcium hydroxide, phosphoric acid (30% RT), hydrochlo-
ric acid (10% RT) and potassium hydroxide.
Ammonia, hydrochloric acid (10% RT), potassium hydrox-
ide, petroleum, gasoline, YUSHIROKEN S50, CHEMI-
COOL Z, VELOCITY NO. 3, YUSHIROKEN EEE-30Y.
9-6 Chemical Resistance of Tag (Reference)
Summary of Contents for V670-H11
