7-5 Functions
7-13
7-5-5 Data Setting
In this screen, you can specify a written data in two hexadecimal digits within 00 and FF.
Setting a data in 1B:
7-5-6 Reading/Writing Data
7-5-6-1 Reading
In this screen, you can read a data from any address of the tag and display it.
Correct Data
When you use the available designation range, check the tag memory capacity.
When you press the
key, the screen is
ready to accept the address entry. The avail-
able keys are
to
and
to
.
Set the start address to 10h and the end
address to 1Fh.
When you press the
key, a data is read out of
the tag and a maximum of 4 bytes of data beginning
with the specified start address is displayed.
When you press the
key
, the start address
value increases one. Then, the first address of the
displayed 4 bytes of data is changed.
Summary of Contents for V670-H11
