46
Sec
tio
n 4
Cr
e
a
ting S
e
tt
ing File
s
Us
ing t
h
e
2
DCR
Conf
ige
a
r
V400-H101/201
User’s Manual
Section 4
System Settings
Creating Setting Files Using the 2DCR Con-
figear
Create the data setting file for loading setting data to the Handheld 2D Code Reader.
Make the settings for the communications conditions, functions, and display conversion.
Select
Setting Reader - Create Data...
from the menu.
The following window for creating the setting data file will be displayed.
■
Open
Opens the previously created data setting file for editing.
■
Save
Saves the created data setting file.
To save data to the Memory Card, create a folder with the name
SETTINGS
, and save. The Hand-
held 2D Code Reader's setting mode cannot start if the data is saved in a folder of a different name.
Communication Settings
The settings shown in the following table are set in the Communication Settings Tab
Page in the Create Setting Data Window.
The asterisks indicate default settings.
▲
Setting item
Settings
Baud Rate
9600
*
, 19,200, or 38,400
Parity
None
*
, odd, or even
Data Length
7 bits or
8 bits
*
Stop Bit
1 bit
*
or 2 bits
Header/Footer
Prefix
None
*
, 02 <STX> or 1B <ESC>
Suffix
03 <ETX>, 0A <LF>,
0D<CR>
*
, or 0D0A <CR+LF>
FCS
ON or
OFF
*
