![background image](http://html1.mh-extra.com/html/omron/sysmac-w398-e1-1/sysmac-w398-e1-1_operation-manual_743883021.webp)
7
Basic Operating Procedure
Section 1-5
1-5
Basic Operating Procedure
A basic outline of the procedures required to install the CX-Position and Fins-
Gateway, create data, transfer it to the NC Units, and use in actual operation
is given below.
Method for connect-
ing to PC
• Connected to the RS-232C port on the CPU Unit or a
Serial Communications Board/Unit using an RS-232C
cable.
• Connected to the peripheral port on the CPU Unit
using a peripheral cable, or via Ethernet.
Connected to the RS-232C port on the
CPU Unit using an RS-232C cable.
Networks for con-
nection to PC
Select from the following using the FinsGateway driver:
• Host Link (SYSWAY-CV or RS-232C)
• Ethernet (via an Ethernet board)
Host Link (RS-232C) only
Decimal/binary dis-
play selection
Supported.
Not supported (decimal only).
Changing display
font size
Supported.
Not supported.
NC Unit error log dis-
play
Supported.
Not supported.
Item
CX-Position
SYSMAC-NCT
Summary of Contents for SYSMAC W398-E1-1
