![background image](http://html1.mh-extra.com/html/omron/sysmac-c200h-nc112/sysmac-c200h-nc112_operation-manual_742431171.webp)
Appendix G
Using the C200H-NC112 with CS1-series PCs
167
2.
With the same input condition as above, turn the TRANSFER DATA command bit (word n,
bit 10) from OFF to ON using OUT or another instruction.
Programming Examples
Transferring Data from Other PC Areas
This programming example shows how to transfer the data for three positioning actions starting from D00010.
The initial data is stored in D20022 to D20030. The data and positioning ac-
tions are shown below.
Speed #4
START
Stop
Speed #3
#0
(continuous)
#2
(bank end)
#1
Stop
START
Speed #3
The transfer data is stored in D00010 to D00018. The data and positioning
actions are shown below.
#2
(bank end)
#0
(continuous)
#1
Speed #4
Speed #3
START
Stop
Stop
START
Speed #3
Initial Data
Data To Be Transferred