Omron STC-SBA503POE Product Specifications And User'S Manual Download Page 51 | Manualshive

Page: 51 / 59

background image

No.13S094-05

51/59

STC-SCA503POE / STC-SBA503POE

Product Specifications and User’s Guide

9.14

GenICam Command List

DeviceControl

Name

Description

DeviceVendorName

Name of the manufacturer of the device.

DeviceModelName

Model of the device.

DeviceManufacturerInfo

Manufacturer information about the device.

DeviceVersion

Version of the device.

DeviceID

Device's serial number.

DeviceUserID

User-programmable device identifier.

DeviceScanType

Scan type of the sensor of the device.

DeviceTemperature

Device temperature in degrees Celsius (C).

DeviceReset

Reset the device to its power up state.

ImageFormatControl

Name

Description

SensorDigitizationTaps

Number of digitized samples outputted simultaneously by the camera A/D conversion
stage.

Width

Width of the image provided by the device (in pixels).

Height

Height of the image provided by the device (in pixels).

SensorShutterMode

Sets the shutter mode of the device.

DecimationHorizontal

Horizontal sub-sampling of the image. This reduces the horizontal resolution (width) of
the image by the specified horizontal decimation factor.

DecimationVertical

Vertical sub-sampling of the image. This reduces the vertical resolution (height) of the
image by the specified vertical decimation factor.

RegionSelector

Selects the Region of interest to control. The RegionSelector feature allows devices that
are able to extract multiple regions out of an image, to configure the features of those
individual regions independently.

ReverseX

This feature is used to flip horizontally the image sent by the device. The AOI is applied
after the flipping.

ReverseY

This feature is used to flip vertically the image sent by the device. The AOI is applied
after the flipping.

PixelFormat

Format of the pixels provided by the device. It represents all the information provided by
PixelCoding, PixelSize, PixelColorFilter combined in a single feature.

PixelCoding

Coding of the pixels in the image, Raw gives the data in the native format of the sensor.

PixelSize

Total size in bits of a pixel of the image.

PixelColorFilter

Type of color filter that is applied to the image.

TestImageSelector

Selects the type of test image that is sent by the camera.

OffsetX

Horizontal offset from the origin to the region of interest (in pixels).

OffsetY

Vertical offset from the origin to the region of interest (in pixels).

For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com

Aegis

Electronic

Group,

Inc.

«
...
49
50
51
52
53
...
»

Summary of Contents for STC-SBA503POE




























































Reviews:

No comments

Related manuals for STC-SBA503POE

Brand: Mahindra Pages: 12

CAMEDIA C-60 Zoom

Brand: Olympus Pages: 2

Brand: Canon Pages: 132

CAMEDIA C-5500 Sport Zoom

Brand: Olympus Pages: 2

FE 370 - Digital Camera - Compact

Brand: Olympus Pages: 70

FE 370 - Digital Camera - Compact

Brand: Olympus Pages: 70

Brand: Olympus Pages: 68

Brand: WildSpot Pages: 12

MAXXUM 2XI - PART 1

Brand: Minolta Pages: 24

Roadrunner 530A5GPS

Brand: Prestigio Pages: 7

Micro Visioval 294200

Brand: Virax Pages: 36

Brand: Uniden Pages: 6

Brand: Wonwoo Pages: 19

Brand: Olympus Pages: 124

Brand: JAI Pages: 61

Brand: Alecto Pages: 2

Brand: Elmo Pages: 50

Brand: Vivitar Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands