Omron NYM12W-C100, User Manual

Page: 58 / 130

Item Description Details
I OK button Applies the changes and closes the window
J Cancel button Exits the utility
K Apply button Applies the changes
*1. The Industrial Monitor Utility scans the connected USB devices and shows a list of connected monitors. If an
Industrial Monitor is not connected with the USB cable, it will not be found.
*2. With a very low backlight brightness setting (15%-0%) the displayed information might not be visible in an envi-
ronment with high ambient light conditions. This prevents brightness adjustments with the Industrial Monitor Utili-
ty.
Additional Information
To adjust the backlight brightness when the brightness setting is set too low:
•
Bring the Monitor in a low ambient light environment
•
Lighten the display with a bright flashlight
Compatibility
This monitor utility can be used on any PC that is connected to an OMRON Industrial Monitor.
This monitor utility can be used with:
• Windows Embedded Standard 7
• Windows 10
Additional Information
This monitor utility does not support 3rd party monitors.
Installation
The Industrial Monitor Utility is pre-installed on the Industrial Box PC and the Industrial Panel PC.
Download the Industrial Monitor Utility from the OMRON download website for re-installation or for in-
stallation on another Industrial PC.
The Industrial Monitor Utility is installed onto Windows, and can be accessed via the Windows start
menu and the Industrial PC Tray Utility. Installing the Industrial Monitor Utility will also install the Indus-
trial PC Tray Utility.
Additional Information
Refer to 3-2-4 Industrial PC Tray Utility on page 3 - 10 for Industrial PC Tray Utility details.
Startup
The Industrial Monitor Utility can be started from:
• Windows Start Menu.
Select Omron and then Industrial Monitor Utility .
• Industrial PC Tray Utility
3 Software
3 - 6
NY-series Industrial Monitor User's Manual (W554)