Refer to the
NXR-series IO-Link Master Unit for EtherNet/IP User’s Manual (Cat. No. W619)
for details
on how to configure the function through message communications.
Setting Method
The following describes how to configure the function from CX-ConfiguratorFDT. Refer to
Setting IO-
Link Devices with the CX-ConfiguratorFDT
in the
NXR-series IO-Link Master Unit for EtherNet/IP
User’s Manual (Cat. No. W619)
for how to create a network configuration and how to go online.
1
Create a network configuration and then register the Digital I/O Hub.
2
Double-click or right-click the device DTM for the Digital I/O Hub to configure, and then select
Configuration
.
The Configuration tab page is displayed. In the Configuration tab page,
Menu
is displayed with
Parameter
selected. Refer to
on page A-6 for details on the
Configuration tab page.
3
Expand
Pin4 Input Filter Setting
and
Pin2 Input Filter Setting
. From the drop-down list of
Value
of
Port
£
Pin4 Input Filter Setting
and
Port
£
Pin2 Input Filter Setting
, select a filter
value.
4
Right-click the device DTM for the Digital I/O Hub where to store parameters and select
Go
online
.
The relevant device goes online. Devices in the Network View are displayed in bold while you
are online.
5
Right-click the device DTM again and select
Store to device
.
The parameter settings are stored in the Digital I/O Hub.
7-1-8
Communications Error Output Setting
This section describes the communications error output setting.
Overview and Applications
This function performs the preset output operation when the Digital I/O Variable Hub cannot receive
output data from the IO-Link Master Unit.
The Hub cannot receive output data in the following situations.
• When an IO-Link communications error occurred.
• When the Hub received an output disabled notification from the IO-Link Master Unit.
Applicable Hubs
Digital I/O Variable Hub
7 Functions of IO-Link I/O Hubs
7-14
NXR-series IO-Link I/O Hub User’s Manual (W620)
Summary of Contents for NXR Series
