Omron NXR Series, User Manual

Page: 106 / 134

Overview and Applications
This function records the time period during which the Unit/input power is supplied to the Digital I/O
Hub, and displays the period as the operating hours of the Hub.
Applicable Hubs
All models of the Digital I/O Hub
Function Details
The following shows the specifications of the monitoring total power-ON time.
Item Specification
Measurement time 0 to 715,827,882 hours
Measurement interval 10 minutes
Display unit
1 hour (truncated to an integer)
Default setting 0 hours
Setting Method
There is no setting for this function.
Checking the Operating Hours
There are two ways to check the operating hours.
• Check from CX-ConfiguratorFDT
• Check through message communications from the Controller to the IO-Link device

Checking from CX-ConfiguratorFDT
The following describes how to check from CX-ConfiguratorFDT. Refer to Setting IO-Link Devices
with the CX-ConfiguratorFDT in the NXR-series IO-Link Master Unit for EtherNet/IP User’s Manual
(Cat. No. W619) for how to create a network configuration and how to go online.
1
Create a network configuration and then register the Digital I/O Hub.
2
Right-click the device DTM and select Go online .
The relevant device goes online. Devices in the Network View are displayed in bold while you
are online.
3
In the Configuration tab page, click Observation under Menu .
The Operating Hours indicates the operating hours of the Hub.
7 Functions of IO-Link I/O Hubs
7-16
NXR-series IO-Link I/O Hub User’s Manual (W620)