background image

 

 

Manual 

Neon 2000 Family  

Neon Remote Terminals (NRT) & 

Neon Remote Modules (NRM) 

 
 

 
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC 
Rules in the U.S.A. These limits are designed to provide reasonable protection against harmful interference when the equipment 
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to 
correct the interference at his own expense.  
 
This equipment has been tested for compliance with European regulations as follows: 
 
Application of Council Directive:  
2004/108/EC 
 
Standards to which Conformity is declared: 
EN-61000-6-1:2001  
EN-61000-4-2:1995  
EN-61000-4-3:1995  
EN-61000-4-4:1995  
EN-61000-4-6:1996  
ENV-50204:1995  
 
Any changes or modifications to this equipment not expressly approved by the manufacturer Unidata Pty Ltd could void the 
user’s authority to operate this equipment. 

 

 

 

 

 

Revision History 

File name / Revision 

Date Authors 

Previous version BX 

2004 RS/ 

JH 

Unidata Manual - 2001 2002 NRT Issue 2.2 

2007 

AB/CB/JH/MS/KC 

Unidata Manual - 2001 2002 NRT Issue 2.3 

2008 

AB/CB/JH/MS/KC 

Unidata Manual - 2001 & 2002 NRT Issue 2.4.doc 

2008 

DM 

Unidata Manual - Neon 2000 Series Remote Terminals and Modules issue 3.0 

2010 

DM/MS/KC 

Unidata Manual - Neon 2000 Family Remote Terminals and Modules issue 3.1 

2010 

DM/MS/KC 

Unidata Manual - Neon 2000 Family Remote Terminals and Modules issue 4.0 

25/09/2013 

MP 

 

Copyright © Unidata Pty Ltd 2000-2013. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, 
stored in a retrieval system, or translated into any spoken or computer language, in any form or by any means. Electronic, 
mechanical, magnetic, optical, chemical, manual or otherwise, without prior written permission of Unidata Pty Ltd 40 Ladner St, 
O’Connor Western Australia 6163. 

 

Summary of Contents for Neon 2000 Series




























































Reviews: