Appendix 6 Using Virtual Memory
Appendix 6-1 Setting and Deleting the Paging File
Appendix-30
Appendix
Appendix
2. Click the
Advanced
Tab and then click the
Change
Button in the
Virtual
Memory
Area.
3. Next we will set up or delete the paging file.
1) The following steps are for setting up the paging file.
Make sure that the drive selected is C: (i.e., the Memory Card). Then select the
Custom size
Option, and input values to specify the
Initial Size
and
Maximum
Size
Fields.
In the
Initial size
Field, input the amount of memory that you want to use for the
paging file.
In the
Maximum size
Field, input the maximum amount of memory that you want
to use for the paging file.
Note
A paging file of the size that you specified will be created in the drive that you specified.
In the example shown above, a 753-MB file will be created in the C: drive (i.e., the
Memory Card). Check the amount of free space on the Memory Card, and set the initial
size and maximum size appropriately.
Summary of Contents for NSA12-TX11B
