Omron NSA12-TX11B, User Manual

Page: 108 / 116

Appendix 4 Connecting an NE1S-Series CPU Unit
Appendix-26
Appendix
A
pp
endix
Appendix 4 Connecting an NE1S-Series
CPU Unit
Two serial ports cannot be used at the same time if the NE Programmer is installed
in the NSA-series Industrial PC and an NE1S-Series CPU Unit is connected using
the USB port. The use of either COM1 or COM 2 must be prohibited.
1. Start the
NSA-series Industrial PC
and open the Control Panel from the Start
Button at the bottom left of the screen. Select System .
2. Click the Hardware Tab in the displayed System Properties Dialog Box, and
click the Device Manager Button.