Appendix 6 Using Virtual Memory
Appendix 6-1 Setting and Deleting the Paging File
Appendix-29
A
pp
endix
Appendix
Appendix 6 Using Virtual Memory
The NSA-series Industrial PC is set by default to not use virtual memory. When
physical memory alone is not sufficient, it is necessary to set up a paging file and
use virtual memory. This section will explain how to set up a paging file on the
Memory Card so that virtual memory can be used.
Note
There is a limit to the number of times that the Memory Card can be written. Setting a
paging file will shorten the life of the Memory Card. Create a paging file on the Memory
Card only when the physical memory capacity is insufficient. Generally, when using the
NSA-series Industrial PC, it is recommended to return the paging file setting to its
default setting, so that the paging file is not used.
Appendix 6-1
Setting and Deleting the Paging File
1. Select
Start – Control Panel – Performance and Maintenance – System
Properties
, and click the
Advanced
Tab. Click the
Settings
Button in the
Performance
Area.
Note
If the Control Panel is set to classic mode, select
Start – Control Panel – System
Properties
.
Summary of Contents for NSA12-TX11B
