Appendix 2 Using the Enhanced Write Filter
Appendix 2-3 Enabling the EWF Function
Appendix-22
Appendix
Appendix
Appendix 2-3 Enabling the EWF Function
Display the command prompt screen, then input the following command to enable
the EWF function. After the Unit is normally restarted, the data on the DOM will not
be directly written, but will be emulated on the main memory.
Command: ewfmgr c: -enable
Execution example
Appendix 2-4 Updating Data on the Memory Card When the EWF
Function Is Enabled
Display the command prompt screen, then input the following command to update
the data on the Memory Card even when the EWF function is enabled. The next
time that the Unit is normally restarted or shut down, the data that was emulated on
the main memory will be reflected on the Memory Card.
Command: ewfmgr c: - commit
Execution example
Summary of Contents for NSA12-TX11B
