Omron NSA12-15-TX11B, User Manual

Page: 80 / 114

5-3 Troubleshooting Guide
5-3-1 Remedies for Problems
5-8
5
Maintenance
Problem Possible cause Remedy
Failure notification is disabled. Enable failure notification. Refer
to 4-4-2 Setting the Failure
Notification Function.
Failure notification is not given.
The DIP switch is set to disable
the Action on Errors Function.
Set the DIP switch to disable the
Action on Errors Function and
restart the device. Refer to 3-3
Installing a PCI Board and
Setting the DIP Switch.
The date or time of the RAS log
does not match the date or time
of the OS.
The date or time in the OS was
changed.
Set the time for RAS before
setting the time for the RAS
Utility. Refer to 4-4-4 Log Filter
(Filter and Find).
There is insufficient memory. The memory capacity is
insufficient.
Close all unnecessary
applications. If memory is still
insufficient after closing
unnecessary applications, set up
virtual memory. For information
on setting up virtual memory,
refer to Appendix 6 Using Virtual
Memory.