Omron NE1A-EDR01, Operation Manual

Page: 86 / 109

69
DST1 Series Monitoring Section 4-7
Monitor value: 1: ON, 0: OFF Status value: 1: Normal, 0: Error
Instance ID: 340
For details on overall status, refer to 4-7-1 Monitoring the DST1-ID12SL-1 .
Status value: 1: Normal, 0: Error
4-7-2 Monitoring the DST1-MD16SL-1
Note (1) Overall Status
Read Data Format (Read Size: 1 Byte)
Status
+2 Safety input
terminal No.
11 status Safety input
terminal No.
10 status Safety input
terminal No.
9 status Safety input
terminal No.
8 status Safety input
terminal No.
7 status Safety input
terminal No.
6 status Safety input
terminal No.
5 status Safety input
terminal No.
4 status
+3 Muting
lamp status Reserved Test output
terminal No.
3 status Test output
terminal No.
2 status Test output
terminal No.
1 status Test output
terminal No.
0 status
Offset
(bytes)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Offset
(bytes)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
+0 Overall status
+1 Reserved Test output
terminal No.
3 status Test output
terminal No.
2 status Test output
terminal
No. 1 status Test output
terminal
No. 0 status
Service code Class ID Instance ID Request data
(attribute ID)
Safety input monitor
Safety input status
Safety output monitor
Safety output status
Overall status (See note 1.) Input value/
status 0E hex 04 hex Refer to the table in
note 4. 03 hex
Safety input error cause
(See note 2.) Error cause 0E hex 3D hex 01 to 08 hex 6E hex
Safety output error cause
(See note 3.) Error cause 0E hex 3B hex 01 to 08 hex 6E hex
+0 Status
Bit Meaning
0 Input Power Supply Voltage Monitor Flag
OFF: I/O power supply ON, ON: I/O power supply OFF
1 Output Power Supply Voltage Monitor Flag
OFF: I/O power supply ON, ON: I/O power supply OFF
2 Network Power Supply Voltage Monitor Error Flag
OFF: Normal (higher than monitor set value), ON: Error (not higher
than monitor set value)
3 Module Maintenance Flag
OFF: Within range (lower than monitor set value), ON: Out of range
(not lower than monitor set value)
4 Reserved
5 I/O Error Flag
OFF: Normal (all I/O points normal), ON: Error (one or more I/O points
abnormal)