4 Creating and Debugging the HMI Application
4 - 24
NA-series Programmable Terminal Startup Guide (V120)
Additional Information
The Simulator is not totally the same as the actual HMI. Final verification of operation on the
actual HMI is always required.
Use the following procedure to debug the project that you created to ensure that it operates correctly.
Use the Simulator to click each button to confirm whether values are set in the Controller correctly and
lamps are displayed correctly.
1
Change the device to the Controller.
2
Click
Global Variables
under
Programming - Data
to open the Global Variables Tab Page, and
drag
SwGreen
,
SwRed
and
SwYellow
to a Watch Tab Page to register them.
4-8-3
Debugging