4 Creating and Debugging the HMI Application
4 - 4
NA-series Programmable Terminal Startup Guide (V120)
Use the following procedure to open an existing project.
1
Click the
Open Project
Button in the Project Window.
Click the
Button.
The Project List Dialog Box is displayed.
2
Select the project that was created in the
NJ-series Machine Automation Controller Startup
Guide (CPU Unit)
(W513) in the Project List Dialog Box and click the
Open
Button.
Click the
Button.
Additional Information
If you open a project that was created on a version of the Sysmac Studio that is older than ver-
sion 1.13, the following dialog box will be displayed. Click the
OK
Button and convert the proj-
ect so that it can be used in Sysmac Studio version 1.13 or higher.
Opening an Existing Project