4 - 11
4 Creating and Debugging the HMI Application
NA-series Programmable Terminal Startup Guide (V120)
4-6
Making
the
Initial HMI Setting
s
4
• TCP/IP Settings
These settings are for the Ethernet port. Here, the default settings are used.
Item
Description
Ethernet Port 1 - Settings
IP Address
Sets the local IP address.
Subnet mask
Sets the subnet mask.
Default gateway
Sets the IP address of the default gateway. This setting is not required
when a default gateway is not used.
Primary DNS server
Sets the IP address of the primary DNS server.
Secondary DNS server
Sets the IP address of the secondary DNS server.
Primary WINS server
Sets the IP address of the primary WINS server.
Secondary WINS server Sets the IP address of the secondary WINS server.
Ethernet Port 2 Settings
Direct connection with
Sysmac Studio
Select this check box to connect Ethernet port 2 directly to the Sysmac
Studio without going through an Ethernet switch. If you select this check
box, the IP addresses and other settings for Ethernet port 2 are ignored.
IP Address
Sets the local IP address.
Subnet mask
Sets the subnet mask.
Default gateway
Sets the IP address of the default gateway. This setting is not required
when a default gateway is not used.
Primary DNS server
Sets the IP address of the primary DNS server.
Secondary DNS server
Sets the IP address of the secondary DNS server.
Primary WINS server
Sets the IP address of the primary WINS server.
Secondary WINS server Sets the IP address of the secondary WINS server.