Omron MicroHAWK F320-F, User Manual

Page: 137 / 146

Appendices
D-6 MicroHAWK F320-F / F330-F / F420-F / F430-F Smart Camera User Manual
Queries the units being used for autofocus, mm (0) or inches (1).
Returns white balance settings: RED gain, BLUE gain, and GREEN gain.
Performs an autofocus by analyzing the area around the point specified by x and y .
The response is in the format of the camera’s current focus, min. allowable focus on the camera, max.
allowable focus on the camera.
Example:
Perform a quick focus on point (640,480) in the image.
Command: QUICKFOCUS 640 480
Response: 124;50;300 (Current focus is set to 124 mm with an allowable focus range of 50 – 300 mm
on the current camera.)
Important: This command only functions when the camera is OFFLINE.
Queries if inspection is waiting for a trigger. !1 if all inspections are ready or !0 if not all inspections are
ready.
-insp=n specifies the inspection to query if it is ready.
Reboots the device.
-noload = do not load BOOT job.
Restores preset white balance parameters: RED gain, BLUE gain, and GREEN gain.
QUERYFOCUSUNITS
QUERYWHITEBAL
QUICKFOCUS [x] [y]
READY? [-insp=n]
REBOOT [-noload]
RESTOREWBAL