15
15
SETTING THE ADVANCED POSITIONING SENSOR
The Advanced Positioning Sensor (APS
®
) will assure you the unit is in the
correct position level with the user’s heart before the monitor starts to take
the measurement. When the APS is set to ON, the Heartbeat Symbol (
)
flashes once your wrist is in the correct position. The APS is set to ON at
the time of purchase.
1. TO CHANGE THE SETTING
Press the START/STOP button
to turn the power off, then press
the SET button.
The Position Sensor symbol (
) will
appear on the display.
2. SELECTING ON OR OFF
Press the MEM button to change the setting to OFF.
Press the MEM button again to change the setting to ON.
3. CONFIRM THE SETTING
Press the START/STOP button to confirm the APS function you
selected and to turn the monitor off.
HEM-650_E_SP_q6.qxp 6/25/07 7:19 PM Page 15