H8BM
H8BM
4
Outputs
Forecast (1 to 9)
Each of these outputs turns ON when its forecast value has been reached.
When Counter is used as totalizing counter, output one-shot signals as carry signals.
Retain outputs until count values are reset.
RUN
Turns ON when Counter is operating normally.
Machine stoppage
Turns ON when count value of one Counter has reached set machine set machine stoppage value.
Retains output until count value is reset.
Note:
The input and output signals are enabled when power is applied to the Counter. During a power failure, the input signals are disabled,
and the output signals are turned OFF.
Nomenclature
I/O Inhibit Indicator
Indicates that the input/output
inhibit input signal is ON.
Re-monitor Input Indicator
Indicates that the re-monitor
input signal is ON.
Reset Input Indicator
Indicates that the reset input
signal is ON.
Counter No. Indicator
Indicates the number of the
Counter whose data (count
value, preset value, etc.) is
currently displayed.
RESET Key
Resets the count value
and output signals.
COUNTER No. Key
Selects the Counter in
sequence each time this
Selector is pressed: (Any
Counter whose forecast value
is set to 0 is skipped in the
RUN mode.)
The following indicators light to show that the count value has reached
the preset value and that the output has turned OFF.
Control Output Indicator (Red LED):
Pre-forecast value: LCD lights
Forecast value: RED LED lights
Control Output Indicator (LCD):
Machine stoppage value: Indicator flashes between red and green
and LCD output indicator flashes.
Count Value
Indicates the current count (current time in
timer mode)
Set Mode Indication
: RUN mode
Preset Value
Always indicates the forecast value during
the RUN operation. Indicates the set
value in each setting mode.
Up Keys 1 to 6
Each of these keys increments the preset
value of the corresponding digit, each
time it is pressed.
MODE Key
Selects the mode in sequence each time
this key is pressed:
SET Key
Inputs the set or changed data.
RUN
Forecast
value
Pre-forecast
value
Machine
stoppage
value
: Forecast value
: Pre-forecast value
: Machine stoppage value
CNT
No.
MODE
Note:
Models with only 1-stage setting (H8BM-
j
D
j
) are not provided with pre-forecast and machine stoppage output function; only the
forecast output function is provided.
