H7CX-R
@
-N
41
Nomenclature
Dimensions
(Unit: mm)
Tachometers
(Factory setting)
ON
(Enable)
(Factory setting) OFF
(Disable)
10 mm
6 mm
6
4
5
7
8
9
10
11
2
3
1
1. Hold Indicator (orange)
2. Key Protect Indicator (orange)
3. Control Output Indicator (orange)
4. Comparison Value 1, 2 Stage Indicator
(1-output models)
(2-output models)
Lit when the key protect switch is ON.
(Lit when the hold input or hold key is ON. )
7. Mode Key
(Used to switch mode and setting items.)
11. DIP Switch
1
6
5. Present Value (Main Display)
8. Hold Key
9. Up Keys to
Character height: 10 mm (red)
(Used to sustain the measurement value and output.)
6. Comparison Value (Sub-display)
Character height: 6 mm (green)
10. Key-protect Switch
1st digit
6th digit
Display Section
Operation Keys
Switches
Character Size
for Sub-display
Character Size
for Main Display
OFF
ON
1
2
3
4
5
6
7
8
OUT
OUT
1
2
63.7
14.4
6
44.8
×
44.8
48
×
48
Dimensions without Flush Mounting Adapter
H7CX-R
@
-N
Note:
1.
The mounting panel thickness should be 1 to 5 mm.
2.
To allow easier operation, it is recommended that
Adapters be mounted so that the gap between
sides with hooks is at least 15 mm (i.e., with the
panel cutouts separated by at least 60 mm).
3.
It is possible to horizontally mount Timers side by
side. Attach the Flush Mounting Adapters so that
the surfaces without hooks are on the sides of the
Timers. If Counters/Tachometers are mounted side
by side, however, water resistance will be lost.
60 min.
60 min.
15 min.
45
+0.6
−
0
45
+0.6
−
0
n side by side mounting
A
With Y92A-48F1 attached.
With Y92A-48 attached.
A=(48n
−
2.5)
+1
−
0
A=(51n
−
5.5)
+1
−
0
A={48n
−
2.5+(n
−
1)
×
4}
+1
−
0
Panel Cutouts
Panel cutouts are as shown below
(according to DIN43700).
58
48
89.9
7.5
Panel
(51)
Y92S-29 (order separately)
Waterproof Packing
Y92F-30 (order separately)
Flush Mounting Adapter
P3GA-11
(order
separately)
Rear Surface
Connection
Socket
Dimensions with Flush Mounting Adapter (Adapter and
Waterproof Packing Ordered Separately)
H7CX-R
@
-N
H7CX-R
@
-N
P2CF-11(-E) (order separately)
Front Connecting Socket
100.9
103.2*
Dimensions with Front Connecting Socket
H7CX-R
@
-N
* These dimensions vary with the kind of DIN track (reference value).
Summary of Contents for H7CX- -N Series
Page 54: ...54 MEMO ...
