Omron G9SX-NS, Brochure

Page: 8 / 28

D40A/G9SX-NS
8
Characteristics
*1. When two or more Units are connected b y logical AND, the operating time and response time are the sum total of the operating times and
response times, respectively, of all the Units connected b y logical AND.
*2. Represents the operating time when the safety input turns ON with all other conditions set.
*3. Represents the operating time when the logical AND input and the Non-contact Door Switch input turn ON with all other conditions set.
*4. This does not include the operating time or response time of G9SX-NS @ that are connected.
*5. This does not include the operating time or response time of internal relays in the G9SX-EX- @ .
*6. The failure detection time for 24 V short-circuit failure on the input to Non-contact Door Switches is 3 5 ms max.
If using the Switch for an application other than as a Door Switch, calculate the safe distance using a failure detection time of 3 5 ms.
Item Model G9SX-NS202- @ G9SX-NSA222-T0 3 - @ G9SX-EX- @
Over-volta g e cate g ory
(IEC/EN 60664-1)
II
II (Relay outputs 1 3 to 4 3 and 14
to 44: III)
Operatin g time (OFF to ON state) * 1
100 ms max. (Logical AND
connection input ON and
Non-contact Door Switch input
ON)
50 ms max. (Safety input: ON) * 2
100 ms max. (Logical AND
connection input ON and
Non-contact Door Switch input ON)
* 3
3 0 ms max. * 4
Response time (ON to OFF state) * 1
15 ms max. (Logical AND
connection input: OFF)
20 ms max. (Non-contact Door
Switch input OFF)
* 6
15 ms max. (Safety input OFF and
logical AND connection input OFF)
20 ms max. (Non-contact Door
Switch input: OFF)
* 6
10 ms max. * 4
ON-state residual volta g e 3 .0 V max. (safety output, auxiliary output)
OFF-state leaka g e current 0.1 mA max. (safety output, auxiliary output)
Maximum wirin g len g th of safety
input, lo g ical AND connection
input, and Non-contact Door Switch
input
100 m max. (External connection impedance: 100
Ω
max. and 10 nF max.)
Reset input time
(Reset button pressin
g time)
100 ms min.
Accuracy of OFF-delay time * 5 --- Within
±
5% of the set value Within
±
5% of the set value
Insulation
resistance
Between lo g ical AND
connection terminals,
and power supply input
terminals and other
input and output
terminals connected
to
g ether
20 M
Ω
min. (at 100 VDC)
---
Between all terminals
connected to
g ether and
DIN rail
100 M
Ω
min.
(at 500 VDC)
Dielectric
stren
g th
Between lo g ical AND
connection terminals,
and power supply input
terminals and other
input and output
terminals connected
to
g ether
500 VAC for 1 min.
---
Between all terminals
connected to
g ether and
DIN rail
1,200 VAC for 1 min
Between different poles
of outputs
---
Between relay outputs
connected to
g ether and
other terminals
connected to
g ether
2,200 VAC for 1 min
Vibration resistance 10 to 55 to 10 Hz, 0. 3 75 mm single amplitude (0.75 mm dou b le amplitude)
Shock
resistance
Destruction 3 00 m/s
2
Malfunction 100 m/s
2
Durability
Electrical ---
100,000 cycles min. rated load,
switching frequency: 1,800
cycles/hour)
Mechanical ---
5,000,000 cycles min. (switching
frequency: 7,200 cycles/hour)
Ambient operatin g temperature
−
10 to 55
°
C (no icing or condensation)
Ambient operatin g humidity 25% to 85%
Terminal ti g htenin g torque 0.5 N·m (For the G9SX-NS
@
-RT (with screw terminals) only)
Wei g ht Approx. 125 g Approx. 200 g Approx. 165 g