Safety Controller
G9SP
Easy programming for complex safety
control
• Stand-alone Safety Controller for small and mid-sized
machinery
• Three types of CPU with different I/O size to suit the application
• Four types of Expansion I/O Units for hard-wired diagnosis or
standard signals
•
Clear diagnosis and monitoring via Ethernet (Omron FINS
protocol), EtherNet/IP, or serial (RS-232) connection
• Various kinds of safety devices directly connectable like non-
contact switches and safety mats
• Easy design, verification, standardization and reusage of safety
control by unique programming software
• ISO 13849-1 (PLe/Category 4), IEC61508 (SIL3) certified
Example of the system configuration
Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United Status and/or other countries.
Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.
The product photographs and figures that are used in this catalog may vary somewhat from the actual products.
Refer to "
Safety Precautions
" on page
15
.
For the most recent information on models that have been certified
for safety standards, refer to your OMRON website.
Expansion I/O Unit
G9SP Series
PC
Peripheral Tool
G9SP Configurator
WS02-G9SP
@@@
USB Cable
Memory Cassette
CP1W-ME05M
G9SP-N
@@@
CP1W-20EDT/EDT1
CP1W-32ET/ET1
Expandable up to 2 Units
CP1W-CN811
G9SP Series
Expansion I/O Unit
I/O Connecting Cable
When the Units are distantly-positioned
such as one above the other layout
1
NB-Series HMI
Programmable Terminals
RS-232C
Option Board
CP1W-CIF01
or
RS-232C
RS-232C or
Ethernet Comm
u
nication
Standard PLC
CP1W-CIF41
(
V
er. 2.0 or later)
Ethernet
Option Board
or
C
M-EIP-1
(82611-0010)
Ether
N
e
t/IP
Option Board
