Box type
LCD integrated type
•
Connection Method
Align the connector with the socket and
press it straight into place, then fix it with
the screws on both sides of the connector.
Turn OFF the power supply before connecting or
disconnecting a Cable. Peripheral devices may be
damaged if the cable is connected or disconnected
with the power ON.
165
90
190
8 1
1
126
17
80
33
(
)
6.8
11.5
80
17
11
126
(
)
15.45
(
)
68
( )
68
100
64
26
20
13
18
54
(
)
39
4-M4 Depth 6
4-M4 Depth 6
4-M4 Depth 6
A
308
260
246
296
130
110
7
6
68
33
(
)
163.5
(
)
28.4
12.8
10
20
120
120
4-M3 Depth 6
20
120
120
(
)
7
( )
6
(Unit: mm)
(Unit: mm)
+
–
+
–
Controller External Dimensions
•
LCD integrated type
•
Box type
4-
FZ4-(H)60
□
(-10)
FZ4-(H)70
□
(-10)
FZ4-(H)110
□
(-10)
FZ4-(H)65
□
(-10)/FZ4-(H)75
□
(-10)/FZ4-(H)115
□
(-10)
•
LCD integrated type
Make a mount hole on the panel.
Panel thickness range: 1.6 to 4.8 mm
Panel material: Metal (iron, aluminum
or stainless)
Insert the LCD integrated controller
into the hole,
from the front panel.
• Panel mounting
•
Box type
• Side mounting
• Bottom mounting
* No burr allowed
Use the bracket (supplied with the
product) to secure the controller
and the panel.
Tightening torque: 0.5 to 0.6 Nm
297
+1
0
247
(Unit: mm)
126
±
0.25
80 ± 0.25
4-M4 Depth 6
100 ± 0.25
64
±
0.25
(26)
(17)
20
(13)
(1
1)
(18)
54
±
0.25
( )
39
4-M4 Depth 6
Top face
Bottom face
+1 0
Mounting
1
2
3
•
Mounting the controller to the optional
desktop stand.
The controller can be placed on
a desk by attaching the optional
desktop stand (FZ-DS) to the
rear of the controller.
* For details, refer to the instruction
manual of the desktop stand.
•
Mounting the controller to the optional
VESA attachment unit.
VESA-compatible mounting of
the controller is possible by
attaching the optional VESA
attachment unit (FZ-VESA) to
the rear of the controller.
* For details, refer to the instruction
manual of the VESA attachment unit.
4-
* When mounting the controller on its bottom, it must be fixed
without removing the feet to reserve ventilation path.
Controller Specifications
LCD integrated type: Touch pen, mouse etc.
BOX type: Mouse or similar device
RS-232C/422: 1 channel
Ethernet 100BASE-TX/10BASE-T
Use Ethernet port.
Transmission speed: 100Mbps (100BASE-TX)
17 inputs (RESET, STEP0/ENCTRIG_Z0, STEP1/ENCTRIG_Z1, DSA0 to 1, ENCTRIG_A0 to 1,
ENCTRIG_B0 to 1, DI0 to 7)
29 outputs (RUN/BUSY1, BUSY0, GATE0 to 1, OR0 to 1, READY0 to 1, ERROR, STGOUT0 to 3, DO0 to 15)
LCD integrated type: Integrated Controller and 12.1 inch TFT color LCD (Resolusion: XGA 1024´768)
BOX type: Analog RGB video output 1 channel (Resolusion: XGA 1024´768)
4 channels (supports USB1.1 and 2.0)
24 V DC (20.4 to 26.4 V DC)
FZ-S
□
/FZ-S
□
2M/FZ-S
□
5M2/FZ-SF
□
/FZ-SP
□
/FZ-SH
□
is connected:
Camera 2ch type:Approx. 3.7A max.
Camera 4ch type:Approx. 4.9A max.
FZ-SQ
□□□□
is connected:
Camera 2ch type:Approx. 5.0A max.
Camera 4ch type:Approx. 7.5A max.
Between the group of external DC terminals and the ground terminal: 20M
W
min.
(DC100V megger, with internal surge absober removed)
Between the group of external DC terminals and the ground terminal: 1,000 VAC, 50/60 Hz
10 mA max.
2 kV, pulse rise: 5 ns Pulse width: 50 ns
Burst continuing time: 15 ms Cycle: 300 ms
10 to 150 Hz, one-side amplitude 0.1 mm (Max. acceleration 15m/s
2
)
10 times for 8 minutes for each three direction
150 m/s
2
; 3 times each in 6 directions
Operating: 0 to +50 °C (with no icing or condensation)
Ambient temperature specifiable. The cooling fan speed can be
switched according to the setting.
0 to +45 °C: Low speed, 0 to +50 °C: High speed
Storage: –20 to +65 °C (with no icing or condensation)
Operating and storage: 35 % to 85 % (no condensation)
No corrosive gases
D-type ground (ground resistance 100
W
or less) * conventional class 3 ground
IEC60529 IP20
Indoor use
Maximum altitude of 2,000 m
Supply voltage fluctuations of +10 %, –15 % of the rated voltage
Installation category I
Pollution degree 2
ABS
LCD integrated type:Approx 3.2kg ( for 2 camera type) /
Approx 3.2kg ( for 4 camera type)
Box type:Approx 1.8kg ( for 2 camera type) /
Approx 1.9kg ( for 4 camera type)
Operation
Serial communications
Network communications
EtherNet/IP communication
Parallel I/O
Monitor interface
USB interface
Power supply voltage
Current consumption
(At Power supply voltage 24 V DC)
Insulation resistance
Dielectric strength
Leakage current
Noise resistance
Vibration resistance
Shock resistance
Ambient temperature
range
Ambient humidity range
Ambient environment
Ground
Degree of protection
Environmental conditions
(according to
IEC61010-1)
Case materials
Weight
A
＝
104
（
for 4 camera type
）
83
（
for 2 camera type
）
Suitability for Use
s
Omron Companies shall not be responsible for conformity with any standards,
codes or regulations which apply to the combination of the Product in the
Buyer’s application or use of the Product. At Buyer’s request, Omron will
provide applicable third party certification documents identifying ratings and
limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in
combination with the end product, machine, system, or other application or
use. Buyer shall be solely responsible for determining appropriateness of the
particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
See also Product catalog for Warranty and Limitation of Liability.
Oct, 2014
D
OMRON Corporation
Industrial Automation Company
Contact: www.ia.omron.com
Tokyo, JAPAN
OMRON ELECTRONICS LLC
2895 Greenspoint Parkway, Suite 200
Hoffman Estates, IL 60169 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
Regional Headquarters
