P/N 18982-008 Rev A FLOW Service Guide
6
Step Check Item
Task to be Performed
Check
5
Replace
EM2100
FLOW
License
Dongle
Remove old EM2100 FLOW License Dongle and insert new dongle.
□
6
Replace
EM2100
Legacy
License
Dongle
Remove old EM2100 Legacy License Dongle and insert new dongle.
□
7
Place cover
back on and
power up unit
Replace the top panel, install the retaining screws and return the EM2100 to the rack. Plug in
power supply cable. Set power switch on back panel to the On position and then set power
switch on front panel to the On position.
□
8
Enable
entitlement
If replacing EM2100 FLOW License Dongle, follow the procedure in the FLOW CORE
User
’
s Guide section 7.6(Licensing Tab) for enabling entitlement. If only the EM2100 Legacy
License Dongle was replaced no further steps are required.
□
FLOW Dongle
Legacy Dongle
