13
F3SG-RR
Quick Installation Manual
7. Operation Check
After setting with Rotary Switch/End Cap, wiring, mounting and beam alignment are done, check the opera-
tion of the F3SG-RR. Attach the included Troubleshooting Guide Sticker nearby, if necessary.
For more information, visit
TROUBLESHOOTING [EN]
http://www.ia.omron.com/f3sg-r
Blinking
OFF
LED INDICATOR
MAJOR CAUSE
LOCKOUT
Blinking Once
TOP
BLANK
CFG
EDM
INTERNAL
ON/OFF
COM
BTM or LONG
POWER
LOCKOUT
Blinking Twice
POWER
LOCKOUT
STB
SEQ
Cap is not attached. Error of other F3SG in cascade.
Error is detected due to Blanking Monitoring
Error of model combination in cascade
Error of EDM
Error of internal circuit
Error of OSSD lines
Error of communication
Error of DIP-SW setting
Error of emitter
Error due to abnormal power supply or noise
Error due to noise
Error due to vibration or ambient light
Wrong sequence of Muting or Interlock input
ON/OFF, COM, or
INTERNAL
http://www.ia.omron.com/f3sg-r
Refer to
Safety Light Curtain F3SG-RR Series User's Manual
or the website for troubleshooting.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product,
machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the
particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all
cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
See also Product catalog for Warranty and Limitation of Liability.
Suitability for Use
In the interest of product improvement, specifications are subject to change without notice.
Regional Headquarters
OMRON EUROPE B.V. (Representative and Importer in EU)
Wegalaan 67-69, NL-2132 JD Hoofddorp
THE NETHERLANDS
Tel: (31)-2356-81-300 / FAX: (31)-2356-81-388
OMRON ELECTRONICS LLC
2895 Greenspoint Parkway, Suite 200
Hoffman Estates, IL 60169 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011 / Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222 / Fax: (86) 21-5037-2200
OMRON Corporation
Industrial Automation Company (Manufacturer)
Contact: www.ia.omron.com
Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 JAPAN
Suitability for Use
/Contact Information
Mounting/Beam Alignment
Wiring
Setting
Operation check
