Omron E5ZD, Operation Manual

Page: 27 / 157

17
E5ZD-4/6
jj
KJ-E Models
Do not use terminals 5, 6, 11, 12, 17, 18, and 20. Using these terminals may re-
sult in internal damage.
Points 4 and 5 are for 6-point models only.
Terminal no.
Terminal no.
Terminal Block
mounting screw
Terminal Block
mounting screw
1 3 5 7 9 11 13 15 17 19
+ – + – + –
2 4 6 8 10 12 14 16 18 20
+ – + – + –
Point 3 Point 4 Point 5
Point 0 Point 1 Point 2
E5ZD-4/6
jj
P-E Models
Points 4 and 5 are for 6-point models only.
Terminal no.
Terminal no.
Terminal Block
mounting screw
Terminal Block
mounting screw
2 4 6 8 10 12 14 16 18 20
1 3 5 7 9 11 13 15 17 19
A B B A B B A B B
A B B A B B A B B
Point 3 Point 4 Point 5
Point 0 Point 1 Point 2
Connecting Terminals Do not over-tighten terminal screws. When using crimp-type terminals, use
those designed for M3.5 screws (M3.5 x 8, self-rising terminal screws are used).
When using soldered wire tips, connection is facilitated by the self-rising screws;
expose 6 to 8 mm of wire and prepare it carefully.
ÉÉ
ÉÉ
8.1 mm
7.9 mm max.
9.5 mm
6 to 8 mm
Unused Points Terminals for unused points must never be left unconnected, regardless of
whether they are for thermocouples or for platinum resistance thermometers.
E5ZD-4
jjj
-E / -6
jjj
-E Hardware
Section 2-1