E5AK/E5CK/E5EK
E5AK/E5CK/E5EK
101
PARAMETERS DEFINITIONS
Refer to your User’s Manual for each parameter and the calibration mode in detail.
Level 0 Mode for E5AK and E5EK
PV/SV
The process value is displayed on the No.1 display and the set point is displayed
on the No.2 display. When the multi-SP function is in use, the value of the current
set point (SP0 or SPD is displayed).
Run/Stop
Places the controller in RUN mode or in STOP mode.
Manipulated Variable (MV) Monitor for Cool
When the Controller is in heating and cooling control operation, use this
display to monitor the manipulated variable of the cooling output.
Manipulated Variable (MV) Monitor for Heat
Monitors the manipulated variable (MV) for the heating output.
Set Point During SP Ramp
Monitors the set point when the SP ramp function is used.
Valve Opening Monitor
Displays the valve position in percentage format.
Open = 100%
Closed = 0%
For E5
K-
PRR2
50.0
o
c - o
50.0
r - 5
run
0
s p - m
1 3 0
0
0
100
U-m
0
1 3 0 0
0
s p - m
50.0
o
c - o
50.0
r - 5
run
PV/SV
The process value is displayed on the No.1 display and the set point is displayed on the No.2 display.
When the multi-SP function is in use, the value of the current set point (SP0 or SP1 is displayed).
Run/Stop
Places the controller in RUN mode or in STOP mode.
Manipulated Variable (MV) Monitor for Cool
When the Controller is in heating and cooling control operation, use this display to monitor the manipulated
variable of the cooling output.
Manipulated Variable (MV) Monitor for Heat
Monitors the manipulated variable (MV) for the heating output.
Set Point During SP Ramp
Monitors the set point when the SP ramp function is used.
Level 0 Mode for E5CK
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com