Omron E5 J Series, Manual

Page: 6 / 32

E5
j
J E5
j
J
6
Nomenclature
E5CJ
Lights when the control out-
put is ON. In current output
mode, however, the output
indicator will not be lit.
Set Value (SV) Display
Displays the set temperature
and set value of each setting
item.
Output Indicator
Level Key
Press for 1 second minimum to
change levels to set different
groups of parameters.
Display Key
Press to shift the display
to the next parameter.
Process Value (PV) display
Displays the process value, the charac-
ter for the parameter being displayed
on the SV display, and error messages.
Heater Burnout Indicator
Lights when a heater burnout is
detected and stays lit until reset.
Alarm 1 Indicator
Lights when alarm
output 1 is ON.
Alarm 2 Indicator
Lights when alarm
output 2 is ON.
Down and Up Keys
Press to increase or decrease the value on the SV display. Successively
increases or decreases the value when held down for 1 s or more. The
value set will be effective automatically in 2 s or immediately after pressing
the Display Key or Level Key.
Note: There are models that do not incorporate
HB, ALM1, and ALM2 indicators.
E5AJ/E5BJ/E5EJ
Lights when the control out-
put is ON. In current output
mode, however, the output
indicator will not be lit.
Lights when the Temperature
Controller is not in operation.
The E5BJ or any other E5
j
J
model with a communications
function does not incorporate a
stop indicator.
Heater Burnout Indicator
Output Indicator
Level Key
Press for 1 second mini-
mum to change levels to
set different groups of
parameters.
Display Key
Press to shift the display
to the next parameter.
Stop Indicator
Process Value (PV) display
Displays the process value, the
character for the parameter being
displayed on the SV display, and
error messages.
Set Value (SV) Display
Displays the set temperature
and set value of each setting
item.
Alarm 1 Indicator
Lights when alarm
output 1 is ON.
Alarm 2 Indicator
Lights when alarm output
2 is ON.
Lights when a heater burnout is
detected and stays lit until reset.
Down and Up Keys
Press to increase or decrease the value on the SV display.
Successively increases or decreases the value when held down
for 1 s or more. The value set will be effective automatically in 2 s
or immediately after pressing the Display Key or Level Key.