E5
j
J
E5
j
J
3
Specifications
Ratings
Supply voltage
100 to 240 VAC, 50 or 60 Hz
24 V AC/DC, 50 or 60 Hz
Operating voltage range
85% to 110% of rated supply voltage
Power consumption
E5AJ/E5EJ:
10 VA (at 100 VAC) to 14 VA (at 240 VAC)
E5BJ/E5CJ:
10 VA (at 100 VAC) to 12 VA (at 240 VAC)
10 VA (at 24 VAC)
6 W (at 24 VDC)
Input
Thermocouple (K/J/T/L/U/N) or platinum resistance thermometer (JPt100/Pt100), selectable
Current Transformer input
Connect an exclusive Current Transformer unit (E54-CT1 or E54-CT3)
Control
t
t
E5AJ/E5BJ/E5EJ
Replaceable Output Unit (sold separately)
Co
o
output
E5CJ
Relay output
SPST-NO, 3 A at 250 VAC (resistive load)
5CJ
Voltage output
20 mA at 12 VDC (with short-circuit protection)
Current output
4 to 20 mA DC with a load of 600
Ω
max. and a resolution of approx. 2600
Control mode
ON/OFF or PID control (2-PID) with fuzzy self-tuning and auto-tuning
Alarm output
E5AJ/E5EJ: Relay output, 2 independent SPST-NO contacts; 3 A, 250 VAC
E5BJ/E5CJ: Common 2 outputs, 2 independent SPST-NO contacts;
E5CJ: 1 A, 250 VAC; E5BJ: 3 A, 250 VAC
Setting method
Digital setting via Up and Down Keys
Indication method
Digital indications
Character heights: E5AJ: PV: 15 mm, SV: 10.5mm
E5EJ/E5BJ: PV: 14 mm, SV: 9.5 mm
E5CJ: PV: 12 mm, SV: 8 mm
Event input
Contact input:
ON: 1 k
Ω
max., OFF: 100 k
Ω
min.
No-contact input:
ON: residual voltage: 3 V max., OFF: leakage current: 1 mA max.
Other functions
Key protection
Direct and reverse output selection
Multiple SP (four set points; up to four set points available on E5AJ/E5EJ by engineering level)
RUN/STOP (selected via external terminals) (E5AJ, E5EJ)
Heater burnout detection
Note:
It is possible to add other functions from the engineering level. Refer to the
E5
j
J Operation Manual, obtainable from your OMRON
representative, for details.
Summary of Contents for E5 J Series
Page 30: ...E5jJ E5jJ ...
Page 31: ...E5jJ E5jJ ...
