![background image](http://html1.mh-extra.com/html/omron/e5-d-series/e5-d-series_connection-manual_742546039.webp)
9
.
Program
36
9.1.2. SendCmd Instruction and Send/Receive Messages
The following describes the function block for sending a command (hereinafter referred to as
"the SendCmd instruction") and the general operation of sending/receiving a message.
Additional Information
For details on the SendCmd instruction, refer to
Serial Communications Instructions
in
Section 2. Instruction Descriptions
of the
NJ/NX-series Instructions Reference Manual
(Cat.No. W502).
●SendCmd
instruction
Name
Function block
Description
Send
Command
SendCmd
The SendCmd instruction uses a Serial
Gateway and sends a command to SCU.
●SendCm
d instruction argument data