Omron DYALOX INDUSTRIAL PC, Quick Start Manual

Page: 24 / 25

20
Clip Memo
Here you can store short memos in the RAS Board for maintenance reasons.
Item Description Example
Clip Memo A Any text up to 20 characters Last Update
Clip Memo B Any text up to 20 characters RAS Setting
Clip Memo C Any text up to 20 characters 22-02-2006
Clip Memo D Any text up to 20 characters Battery
Clip Memo E Any text up to 20 characters 03-03-2006
Beside the RAS settings there are also some RAS Utility settings. In the RAS Utility settings
you can configure the Thresholds and UPS settings. The RAS Utility settings can be found
from the “Settings” menu by choosing “RAS Utility Settings”.
Click an icon in the list to show the specific page.
Icon Page Description
Thresholds
To tune the Thresholds for the Accumulated Hours, Voltages and
Temperatures of the Motherboard.
UPS
To configure settings at the time of the Power Failure Signal
detection from the UPS.
Others To configure messages for errors and the status refresh cycle.
For the Threshold settings please check the online help file of the RAS Utility.
The UPS settings are explained below.
Item Description
On/Off Enables/disables the UPS Power Failure Signal monitoring.
UPS PF Signal
Detection Cycle
Specifies a monitoring time for UPS Power Failure Signal. Every cycle
RAS will detect the input in the RAS board.
No
Action
No action when the UPS Power Failure Signal is detected.
On Signal
detected
Shutdo
wn RAS Utility executes OS shutdown when the Power Failure
Signal is detected.
Wait time from on
PF Signal detected
The time RAS waits until it shuts down the DyaloX after detecting a PF
signal. Normally this time is set according to the battery capacity of the
UPS and the time needed to safely close the applications currently
running on the DyaloX.