D
40B
G-199
F3SL
Specifications
Sensor (Switch/Actuator)
Note: 1.
These values represent the distances at which OFF changes to ON (approaching) or ON changes to OFF (separating) when the switch
and actuator's target marks are aligned and the sensing surfaces have the same orientation.
2.
If the approach speed is less than the specified value, the Controller's safety contact output may not turn ON, even if the distance is less
than the switching distance.
Controller
Ratings
Power Supply
Switch
Note:
D40B-J1: MOS output; D40B-J2: Contact output.
Characteristics
Item
Type
Standard Sensor
Elongated Sensor
High-temperature Type
Sensor
Switching distance (See note 1.)
(nominal value)
OFF
→
ON: 5 mm
ON
→
OFF: 15 mm
OFF
→
ON: 9 mm
ON
→
OFF: 17 mm
Actuator approach speed (See note 2.)
17 mm/s min.
Operating temperature
−
10 to +55°C
−
25 to +125°C
Operating humidity
90% at +50°C
Degree of protection
IP67
Material
ABS
Stainless steel
Mounting method
M4 screws
Mounting screw tightening torque
1 N·m
Item
Type
D40B-J1
D40B-J2
Power supply voltage
24 VAC/DC
24 VAC/DC or 110/230 VAC (selectable)
Allowable voltage range
Power supply voltage ±15%
Power consumption
2.0 VA max.
4.0 VA max.
Item
Type
D40B-J1
D40B-J2
Rated load
Safety contacts
250 VAC, 4 A, cos
φ
= 1
30 VDC, 2 A, cos
φ
= 1
Auxiliary contacts/output
(See note.)
230 VAC, 100 mA, cos
φ
= 1
24 VDC, 100 mA, cos
φ
= 1
250 VAC, 4 A, cos
φ
= 1
30 VDC, 2 A, cos
φ
= 1
Item
Type
D40B-J1
D40B-J2
Contact resistance
100 m
Ω
(not including auxiliary output)
100 m
Ω
Auxiliary output ON resistance
36
Ω
(nominal value)
---
Response time
25 ms max.
Insulation resistance
100 M
Ω
(at 500 VDC)
Dielectric
strength
Between output poles
1,500 VAC 1 min.
Between inputs and outputs
Between power supply and out-
puts
Vibration resistance
10 to 55 Hz, 1-mm single amplitude, IEC68-2-6
Shock resistance
30G, 11 ms, IEC68-2-27
Durability
Mechanical
1,000,000 operations min.
Electrical
100,000 operation min. (at the rated load)
Minimum rated current for safety contacts
10 VAC/VDC, 10 mA (reference values)
Operating temperature
−
10 to +55 °C
Operating humidity
90% at +50 °C.
Mounting method
35 mm DIN Track (Screw mounting is not possible.)
Terminal screw tightening torque
1 N·m
Weight
147 g
590 g
F502-EN2-04.book Seite 199 Dienstag, 26. Juli 2005 5:48 17
